Curb rash (Outer rim): Moderate curb rash observed on at least one wheel with damage extending approximately 40mm in length along the outer lip edge, visible from 1m distance. The damage shows surface scratches with some material removal on the polished lip section. Additional minor scuffing visible on other wheels in the set, generally only visible up close.

Curb rash (Inner rim): Minor scratches and scuffing observed on the inner rim area of at least one wheel, approximately 20-30mm in length as indicated by measurement sticker. This damage appears shallow and is only visible upon close inspection.

Paint peeling / Corrosion: Localized paint chipping observed on the spoke area of one wheel near the center hub section, measuring approximately 15-20mm. The affected area shows bare metal exposure where paint has flaked away. This damage is visible from approximately 1m distance when viewing the wheel face directly.

White rust / Corrosion: Minor surface oxidation visible on the inner barrel section of the wheels as seen in the interior wheel photos. Light corrosion spots present but not severe. The polished lip areas show some dulling and minor oxidation consistent with age and use.

Suspected distortion: No obvious signs of distortion, bending, or impact damage visible in the provided images. However, these are RAYS Engineering CE Genesis forged wheels (18x7.5J +50, 5x100), and measurement with specialized balancing and runout equipment is recommended to confirm structural integrity before use.

Special notes: Wheels are dated February 2010 according to the manufacturer sticker. The set includes rubber air valve stems which appear aged and should be replaced before mounting. Tires are Seiberling brand with approximately 50-60% tread remaining showing even wear patterns. Center caps and RAYS Engineering decals are present and intact. Overall the wheel set is in usable condition with typical wear for its age, suitable for continued use after addressing the noted curb damage and replacing consumable components.