Curb rash (Outer rim): Moderate curb rash is visible on at least one wheel, with scuffing and gouges along the outer lip edge measuring approximately 30-50mm in length. The damage appears as rough, textured areas where the machined finish has been scraped away, visible from 1-2m distance. Additional minor scuffing is present on multiple wheels along the polished lip sections.

Curb rash (Inner rim): Not clearly visible in the provided images as the inner barrel areas are not shown in detail.

Paint peeling / Corrosion: Minor paint deterioration is observed around the lug nut holes on all four wheels, with some discoloration and surface wear visible around the hub center area. The painted gunmetal portions of the spokes show light wear but no significant peeling. Some oxidation staining is visible around the lug seat recesses, only visible up close.

White rust / Corrosion: Light surface oxidation is present around the lug hole areas on multiple wheels, appearing as brownish-white discoloration. The polished center caps show minor tarnishing. The machined lip surfaces display some light corrosion spots and water staining, visible up close upon inspection.

Suspected distortion: No obvious signs of wheel distortion, bending, or impact damage are visible in the provided images. However, measurement with specialized equipment such as a dial indicator or wheel balancer is recommended to confirm trueness before use.

Special notes: These are Mugen MF10 forged wheels (4x100 PCD) made in Japan with JWL/VIA certification (690kg load rating shown on some, 500kg on others). Rubber snap-in valve stems are installed and appear to be in serviceable condition but should be replaced as a precaution due to age. The polished lip finish shows general wear consistent with normal use. Center caps with Mugen emblem are present and in good condition. Overall, these wheels are in fair used condition suitable for continued use after addressing the curb rash if desired for cosmetic improvement.